Toa IR-702T - Manual (Page 5)

5
1. Power switch
Press this switch to turn on the power. To turn off
the power, press this switch again.
2. Power indicator
Lights when the power is switched on.
3. Reception indicator [IR]
Lights during reception.
4. Color label attachment area
Attach a color label (accessory) of the same color
as that of the infrared wireless microphone to be
used in combination with the tuner.
5. Volume control knob
Adjusts the sound volume of the infrared wireless
microphone.
6. Cable Clip
Run the AC adapter cable through this clip to
prevent its plug from being removed.
7. DC inlet [DC IN]
Connect the supplied AC adapter.
8. Receiver input terminals [IR IN]
Connect the infrared wireless receiver or the
distributor. Up to 4 infrared wireless receivers
can be connected with the use of the YW-1022
(2-Branch Distributor) or the YW-1024 (4-Branch
Distributor).
Note that only one YW-1022 or YW-1024
Distributor can be connected per input channel.
Up to 16 infrared wireless receivers can be
connected with the use of the IR-700D Infrared
Wireless Distributor. For cable connections when
using the IR-700D, refer to the installation
manual enclosed with the IR-700D.
9. CH B output terminal [CH B]
Connect this terminal to the amplifier line input
terminal for public address applications.
This terminal outputs only the CH-B audio signal.
10. CH A/MIX output terminal [CH A/MIX]
Connect this terminal to the amplifier line input
terminal for public address applications.
This terminal outputs either the CH-A audio
signal alone or a mixed CH-A and CH-B audio
signal depending on the setting of the CH A/MIX
output selector switch (11).
11. CH A/MIX output selector switch
• CH A
Only the CH-A signal is delivered at the CH
A/MIX output terminal (10).
• MIX (default position)
Mixed CH-A and CH-B signals are delivered at
the CH A/MIX output terminal (10).
5. NOMENCLATURE AND FUNCTIONS
CH A VOLUME
IR
CH B VOLUME
POWER IR
OFF
ON
IR IN OUTPUT
–10dBV/600Ω 75 Ω
1 2
CH B
CH A
DC IN
24V 0.6A(max) MIX
CH A/MIX
1 2 3 4 5
Note: Functions of the (3), (4), and (5) for the Channel A also apply to the Channel B (CH-B).
6 7 8 9 10 11
[Front]
[Rear]
Cable clip
AC adapter plug