Toa IR-702T - Manual (Page 19)

19
Step 1. Make a mounting hole of 68 mm (2.68") in the ceiling board.
Step 2. Install the mounting plate (supplied with the IR-510R) to the ceiling board.
Notes
• The IR-510R offers a mounting pitch of 83.5 mm (3.29") and can be mounted in an electrical box as
well.
• Use an electrical box in the case of open wiring.
• Use a BNC L connector or an L-shaped adapter connector when mounting the receiver in an
electrical box.
Step 3. After wiring completion, attach the receiver to the mounting plate.
Align the receiver tabs (3 places) with the notches in the plate, then rotate the receiver clockwise to
full stop.
12.1. Ceiling Mounting
Installation direction
Note
Since no mounting screws are supplied
with the unit, prepare them separately.
83.5 mm
(3.29")
ø68 ± 5 mm
(ø2.68" ±0.2")
Mounting plate (supplied with the IR-510R)
Coaxial cable
IR-510R
Infrared wireless receiver
Tabs (3 places)
Mounting screw
1
2
3
12. INSTALLING THE IR-510R INFRARED WIRELESS RECEIVER