Toa IR-702T - Manual (Page 18)

18
11.2.3. Correcting the horizontal angle
Step 1. Loosen the reception angle fixing screw (for horizontal).
Step 2. Direct the reception section to the left or right towards the area, where the infrared wireless
microphones are used, by hand.
Step 3. Retighten the loosened screw in Step 1.
Reception angle fixing screw
Reception section
IR-500R's chassis (top view)
(Factory-preset) (Example when moved to the left)
Note
Never loosen this screw.
11.2.2. Correcting the vertical angle
Step 1. Loosen the reception angle fixing screw (for vertical).
Step 2. Direct the reception section down or up towards the area, where the infrared wireless microphones
are used, by hand.
Step 3. Retighten the loosened screw in Step 1.
Reception angle fixing screw
Note
This screw can be removed and
attached to the other side.
(Factory-preset)
Reception section
Note
Never loosen this screw.
(Example when tilted upward)
IR-500R's chassis (side view)
Correct the reception section’s vertical angle first, then the horizontal angle.