Toa IR-702T - Manual (Page 20)

20
Coaxial cable
Chassis
Wall surface
Mounting screw
(Prepare separately.)
Oval hole
4.5 x 8 mm
(0.18" x 0.31") Body case
Case fixing screw
1, 3
2
4
Note
No need to remove this case fixing screw.
62 mm (2.44")
Step 1. Loosen 2 case fixing screws, then detach the body case.
Step 2. Install the chassis to a wall.
Note
Since no mounting screws are supplied with the unit, prepare them separately.
Step 3. Attach the body case to the chassis.
Retighten 2 loosened screws in step 1.
Step 4. Connect the coaxial cable.
13.1. Wall Mounting
13. INSTALLING THE IR-520R INFRARED WIRELESS RECEIVER