Toa NX-100S Installation - Manual (Page 70)

4-13
Chapter 4: SYSTEM SETTINGS (SETTING USING BROWSER)
6. CONTACT SETTING
When the NX-100/100S unit's contact input is activated, its set broadcast pattern starts broadcasting while
simultaneously enabling other unit's contact outputs. Here, contact input and output settings are performed.
This figure represents the NX-100.
(1) Contact Selection
Select the contact to be set. Selecting the input or output channel number of the contact displays its
contact's setting contents.
(2) Enable/Disable Selection
Select "Enable" or "Disable" for the contact.
Select "Enable" when using the contact function. All setting items are then ready for entry.