Sensor extension cable, Temp / humidity sensors – ThermoWorks TR-72-UI 2 CHANNEL LOGGERS WITH USB User Manual
Page 21

30
31
TR-0206 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time :
In the air : Approx. 75 Sec.
TR-0306 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time:
In agitated water : Approx 18 Sec.
※
Only stainless section is water resistant
TR-0406 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time :
In agitated water : Approx 20 Sec.
※
Only stainless section is water resistant
TR-0506 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time :
In agitated water : Approx 20 Sec.
※
Only stainless section is water resistant
TR-0706 Stainless Protection Sensor
Cable Length : 0.6m
Thermal-Constant Time :
In agitated water : Approx 18 Sec.
※
Only stainless section is water resistant
Materials: ① Thermistor ② TPE resin-shielded sensor ③ TPE resin-shielded wire ④ M3Screw Hole
⑤
Compacion Tube ⑥ Stainless pipe(SUS304) ⑦ Stainless pipe(SUS316)
Possible Measurement Range : -40 to 110℃ Sensor Temperature Durability: -50 to 115℃
Measurement Accuracy : Average ±0.3℃ (-20 to 80℃ )・Average ±0.5℃ (-40 to -20℃ /80 to
110℃ )
Sensor Extension Cable
(
Temp Sensor Only)
unit : millimeters
TR-1C30
Cable length : 3.0m
Materials: ① Vinyl Coated Electrical Wire
Note:
- Only one cable per sensor. When using the extension cable there will be
a +0.3℃ at normal temperature and at -50℃ a gap of +0.5℃ may occur.
- If a sensor extension cable is being used with the data logger connected
by USB to your computer, electromagnetic waves may cause large errors
in measurements.
- Do not use the Extension Cable with TR-72U.
Temp / Humidity Sensors(
For TR-72U
)
TR-3100 Temp / Humidity Sensor
TR-3110 Temp / Humidity Sensor
Cable length : 1m
Materials: ① Temperture/humidity sensor ② Polypropylene resin ③ Vinyl Coated Electrical Wire
Possible temperature measurement range : 0 to 55℃
Possible humidity measurement range : 10 to 95% RH
Sensor temperatur resistance : -10 to 55℃
humidity measurement accuracy : ± 5% RH (At 25℃ 50% RH)
Service life : 1 year (under normal operational conditions)
Operational conditions : Without dew condensation, water leakage or effect from
corrosive gas or organic solvents.
Note: An Extension Cable cannot be used with Temperature/Humidity
Sensors.