ThermoWorks TR-72-UI 2 CHANNEL LOGGERS WITH USB - Manual (Page 19)

26 27
Setting Recording Interval from Main Unit Switch
You can make or change recording interval settings from the "INTERVAL"
switch on the front of the TR-71U/72U main unit.
1.Press in the [INTERVAL] button on the front of the device until the
recording interval appears in the display.
2.With each pressing of the [INTERVAL] button the recording
interval time will change. Press until the desired setting appears.
《 15 seconds》 《 15 minutes》
3.When the desired recording interval appears, stop pressing the
[INTERVAL] button. Within a few seconds, the current measurement
readings will return to the display and the setting will be finished.
- By pressing the [INTERVAL] button during recording or while waiting for a
programmed recording to start, the currently set recording interval will be
displayed.
If Installation Fails
If, during USB device driver installation, some trouble occurs that results in
a failure to install properly, the following display will appear in the Device
Manager.
If this occurs, please re-install from the[USB Device]properties.
How to Re-install
1.In the Device Manager Window, right click on [USB Device] under
[Other Devices] to display the USB Device Properties.
2.In the USB Device Properties Window, click on the [Reinstall Driver]
button to display the Installation Window. Follow the directions to
install.
[ Reinstall Driver]
button