ThermoWorks TR-72-UI 2 CHANNEL LOGGERS WITH USB - Manual (Page 11)

10 11
4.By connecting a data logger to the USB cable already connected to your
computer, the [Add Hardware Wizard] will automatically open.
5.By checking [Install the Software automatically (Recommended)] and
clicking [Next], the software will automatically be installed.
[ Next]
button
Check
6.After installation has been completed, click the [Finish] button.
[ Finish]
button
Caution: If the Driver is not automatically detected, please search by
specifying the place as (CD-ROM [Device Driver]) and install manually
from there.
Checking After Connecting
1.Open the [Control Panel] and double click on [System] ; the system
properties will be displayed.
2.Click the [Hardware] Tab, and click the [Device Manager] button in the
Device Manager Area.
「 Hardware」Tab
Device Manager
[ Device Manager]
button
3.In the Device Manager Window, check to see if [USB Recorder 1] is listed
under [USB Recorder COM].
「 USB Recorder1」