ThermoWorks 292-701 SAF-T-LOG PAPERLESS HACCP THERMOMETER Operating Instructions - Manual (Page 6)

6
Synchronization
When the Saf-T-Log instrument is connected to the computer via the supplied USB cable the software
automatically starts the data transfer from the Saf-T-Log instrument to retrieve the data stored in the device
The ‘Saf-T-Log Connect Status’ windows opens automatically and will update while the stored readings are
being transferred to the PC In the status window, the user will see the Saf-T-Log name, Checklist names,
number of saved readings, the number of high and low alarms and number of failed Yes/No readings Once
the download is complete, all readings may be erased from the Saf-T-Log memory and saved to the PC The
user may select to either automatically erase all readings after download or purge readings at a later date
(see Settings on Page 8)
Software
Note: The buttons ‘Create New Checklist’, ‘Edit Existing Checklist’, ‘Choose New Checklist to send to Saf-
T-Log’, and ‘Keep Existing Checklist’ are only displayed on the ‘Saf-T-Log Connect Status’ window after the
‘Add Notes and Corrective Actions’ window is closed.
Install the Saf-T-Log software onto your PC following the instructions in the Quick Start Guide The Saf-T-Log
software consists of two parts, the Saf-T-Log software and the Saf-T-Log Synchronization window When the
software is installed 2 icons are added to the computer desktop
An icon on the desktop is used to access the main Saf-T-Log software
A synchronization icon is placed in the system tray on the right hand end of the Windows taskbar
This may be in the ‘Hidden Icons’ section () on Windows 7 and above
3 items are also installed in the ‘start menu’