ThermoWorks P770 PRINTING DATALOGGER THERMOMETER - Manual (Page 5)

Note: On all instruments you can select the mea-
surement category (chapter 1.4.2. Prob) according
to the model version. Instruments that are delivered
only with one probe the correct measurement cate-
gory is preset. In other case please check chapter
1.4.2. (Prob) for the correct set-up.
1.4 Menu
The adjustments of the instruments like the mea-
surement value, calibration of Up and down keys
probes, deactivation of channels and so on are
resulting from the structure of the menu. You will
reach into the main menu by pushing
[ENTER/MENUE]. With the up and down keys [
ᮡᮢ ]
you can choose your required menu item. Push
[ESC] to be back in the measuring mode.
Menu structure
1.4.1 Measuring unit switching °C and °F
respective %rH, td or g/m 3 / [Unit]
Unit = Measuring unit
Measuring unit temperature
(°C=Celsius, °F=Fahrenheit)
Measuring unit humidity
(%rH=relative humidity, td=dew point, g/m
3 =abso-
lute humidity)
Important!
5
Unit
°C
°F
m/s
%rh
g/m 3
°C td
°F td
Pa
hPa
Prob Lin2 CAL Chnl ArEA Lo6
P
J
K
L
N
R
S
T
RH
D
Pr
H
T1-T2 oFF
oP1
oP2
OFF c OFF
ON m ON
m 3 /s
❶ up and down keys
❷ key [ESC]
❸ key
[ENTER/MENUE]
❶
❷
❸
DE P700 Anleitung engl. 08/10 27.08.2010 14:02 Uhr Seite 5