ThermoWorks P770 PRINTING DATALOGGER THERMOMETER - Manual (Page 22)

22
P700
Measuring value 1 + 2 autom. recognize FC (hex)
Enabling the keyboard 0 (hex)
Read version number of firmware l (ASCII)
Read memory (only LOG-instruments) n (ASCII)
Attention: By sending the command FC(hex) you
will get the complete data, the instrument lock auto-
matically the keyboard. To release the keyboard you
have to send the command 0 (hex).
The datas would be sent in the following format.
Data Type = String
The length of the string depends on the instrument
(a two-channel or one-channel instrument).
5. Interface protocol
DE P700 Anleitung engl. 08/10 27.08.2010 14:02 Uhr Seite 22