TeeJet FieldPilot Install Case IH 2x90, 2x94, 3x94 - Manual (Page 19)

www.teejet.com
17
FieldPilot ®
11. install the counterBalance hoses and adaPters
Install run tees (V) on the fittings on the steering cylinders. Connect hose (S) to the run of the tee on the left
port of the steering cylinder and route it to C1 on the Counterbalance valve. Connect hose (S) from the run
of the tee on the right port of the steering cylinder to C2 on the Counterbalance valve.
Figure 1-12: Install the Counterbalance Hoses and Adapters
CAUTION! The orientation is important when installing hoses and adapters at the steering cylinder as
illustrated in Step 12.
V
s
s
V
s (from right side)
s (from
left side)