TeeJet FieldPilot Install Case IH 2x90, 2x94, 3x94 - Manual (Page 11)

www.teejet.com
9
FieldPilot ®
iNstAllAtioN
If there are questions concerning the installation of the FieldPilot system on this vehicle, or due to
the changes in component specifications the parts supplied in the kit are not exactly as presented
in this document, please contact your dealer or TeeJet Customer service representative for
clarification before installation. TeeJet Technologies is not responsible for misuse or incorrect installation of
the system.
NOTE: BE VERY CAREFUL TO ABSOLUTELY SECURE ALL CABLES AND HOSES SO THAT THEY
DON’T INTERFERE WITH THE MANY MOVING PARTS OF THE MACHINE!
1. PrePare the FieldPilot ValVe
Make sure the FieldPilot valve (F) is clean and free of dust. Work on a clean bench. Remove the plastic
plugs and install adapter (AA) in the T port. Install adapter (Y) in the B port. Install adapter (X) in the B port
and then install adapter (W) onto adapter (X) . Install adapter (CC) in the P and EF ports.
Figure 1-2: Prepare the FieldPilot Valve
AA CC
CC
CC
Y
W
X