TeeJet FieldPilot Install Case IH 2x90, 2x94, 3x94 - Manual (Page 17)

www.teejet.com
15
FieldPilot ®
9. install the tank hose and adaPter
Disconnect the OUT line on the orbital. Install run tee (V) and reconnect the original OUT line to the run of
the tee. Install adapter (Z) onto the branch of the run tee. Connect hose (R) to adapter (Z) and route it to
the T port of the FieldPilot valve. The hose should route to the right and then around between the engine and
cab over to the FieldPilot valve.
Figure 1-10: Install the Tank Hose and Adapter
Z
r
disconnect
V