Fieldpilot, Ih g j, Kj g j p – TeeJet FieldPilot Install Case 71x0-72x0-89x0 User Manual

Page 15

FieldPilot

98-05107 R2

assembly. Connect the short hydraulic hose

(P)

between the top elbow fitting

(H)

on the load sense shuttle

assembly and the steering orbital load sense fitting.
Figure 1-11: Installing the Tractor Load Sense Shuttle Adapters

B. Steering Orbital on the Front Side

Pre-assemble the load sense shuttle

(G)

with the adapters provided

(J)

and

(K)

as illustrated in Figure 1-12.

Locate the tractor load sense hydraulic hose on the front of the steering orbital as illustrated. Remove the tractor

load sense hydraulic hose from the steering orbital and install the elbow adapter

(L)

to the load sense port on the

steering orbital as illustrated. Attach the center position

(K)

of the assembled load sense shuttle to the tractor

load sense hose. Install hose

(P)

to the elbow adapter

(L)

installed at the orbital and to the end of the load sense

shuttle

(J)

Figure 1-12: Installing the Tractor Load Sense Shuttle Adapters