TeeJet LH 500 - Manual (Page 8)

O PERATING THE LH 500 LH 500 O PERATORS M ANUAL & F ITTING I NSTRUCTIONS
8 LH A GRO
THE SELECTABLE OPERATION FUNCTIONS (POS. 10)
This operation function is user selectable. The selected function is changed by
paging through the available functions with program keys 1 and 2 (pos. 8).
A description of the available functions can be seen on page 9.
AREA/SECTION (POS. 11)
The worked area since the last reset (see page 10), shown as ha.
The area counter is shown with 2 decimal until 99.99 ha.
Hereafter the area covered is shown with 1 decimal until 999.9 ha.
The area is displayed without decimal thereafter.
If the section function is used a value (75, 50 or 25) will be shown in the area
symbol. This value shows how much of the encoded working width is used in
percent.
IMPLEMENT SENSOR STATUS (POS. 12)
When the displayed lift arm is raised the implement sensor is active and area,
time and distance are not measured.
When the displayed lift arm is lowered the implement sensor is not active and
area, time and distance are measured.
The time and distance counters are only started and stopped by the implement
sensor if automatic registration has been selected (see page 6).
FORWARD SPEED (POS. 13)
The current forward speed shown in kph.