Automatic forward speed calibration, Pto sensor warnings, Pto warning forward speed warning ha left warning – TeeJet LH 500 User Manual
Page 13: Pto sensor, Warnings

LH 500 O
PERATORS
M
ANUAL
& F
ITTING
I
NSTRUCTIONS
E
NCODE
LH A
GRO
13
AUTOMATIC FORWARD SPEED CALIBRATION
Step/Key
Description
1
Measure a 100-metre stretch and drive to the start mark.
2
Select the speed sensor as described above.
3
Press this key and drive the measured 100-metre stretch. Stop
exactly at the stop mark.
The computer counts pulses received whilst driving.
4
Press the ENTER key and forward speed calibration is finished.
PTO SENSOR
Encode the number of pulses per revolution for the sensor fitted to the PTO axle.
If the signal from the DIN-ISO socket is used the standard number of pulses = 40.
WARNINGS
The following warnings can be encoded her.
The warnings are given visually (on the screen) and as an audible warning:
PTO WARNING
Warning ON/OFF plus the minimum and maximum RPM at which the warning is
required.
FORWARD SPEED WARNING
Warning ON/OFF plus the minimum and maximum speed at which the warning is
required.
HA LEFT WARNING
Warning ON/OFF plus the area left at which the warning is required.