TeeJet LH 500 - Manual (Page 16)

F ITTING LH 500 O PERATORS M ANUAL & F ITTING I NSTRUCTIONS
16 LH A GRO
FITTING
1. Drill 2 x 5 mm holes with a distance of 55 mm in the machines
right-hand side.
2. Fasten the bracket (pos. 2) with the supplied self-tapping screws.
3. Connect the DIN-ISO plug (pos. 11) to the DIN-ISO socket in the tractor.
The connections in the DIN-ISO socket fitted in the tractor are as follows:
Pin no. Description
1 Radar
2
Forward speed (wheel tractor)
3 PTO
4
Implement signal (lift up/ lift down)
5 Lift arm position
6 +12V
7 0V