TeeJet Matrix Pro 840G Start Up Guide - Manual (Page 4)

6
www.teejet.com
7
98-01380 R0
GO
#9 Go to Guidance Screen
Figure 1-15: Vehicle View Guidance
6.0 mph 7.6 ac
< 0.0 >
Figure 1-16: Field View Guidance
6.0 mph 0 ac
Mark A
Figure 1-17: RealView Guidance
6.0 mph 0 ac
< 0.0 >
#10 choose a Guidance Mode
1. Press NAVIGATION & GUIDANCE OPTIONS icon to
display navigation options.
2. Press GUIDANCE MODE icon .
3. Select from:
►Straight AB
►Curved AB
►Circle Pivot
►Last Pass
►NextRow
Figure 1-18: Choose a Guidance Mode
0.0 mph 0 ac
Mark A
A A
0.0 mph 0 ac
Mark A
#11 Mark a and B points
To establish a AB guideline:
1. Drive to the desired location of Point A .
2. Press NAVIGATION & GUIDANCE OPTIONS icon to
display navigation options.
3. While the vehicle is in motion, press MARK A icon A .
4. Drive to the desired location of Point B .
5. Press MARK B icon
B to establish the AB line.
6. “Would you like to name this guideline?”
Press
►Yes – to enter a name and save the guideline in the
console.
►No – to automatically generate a name and save the
guideline in the console.
The console will begin providing navigation information.
NOTE: The MARK B icon
B is not available for selection
(grayed out) until the minimum distance is travelled.
Use CANCEL MARK icon to cancel the Mark A command
and revert to the previous AB guideline (when established).
To establish additional guidelines, follow the same steps as the
initial guideline.
Figure 1-19: Mark A Point
12:32 PM 7.2 mph
Mark A
Figure 1-20: Mark B Point
1:14 PM 7.2 mph
Mark B
B
Figure 1-21: Save Guideline
1:14 PM 7.2 mph
> 0.0 <
Would you like to name this guideline?
Yes No
Figure 1-22: Follow Guidance
2.73 ac 7.2 mph
> 0.0 <