Cabletron Systems 2E43-27R - Manual (Page 111)

Port Redirect Function Screen
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-59
Figure 5-24 Port Redirect Function Screen
The following definitions briefly explain each field of the Port Redirect
Function screen:
Source Port (Read-only)
Shows which ports are currently set as source ports.
Destination Port (Read-only)
Shows which ports are currently set as destination ports.
Remap Errors (Read-only)
Displays whether the corresponding source ports are configured (ON) to
send errored frames to the destination ports, or (OFF) to drop all errored
frames and only forward traffic without errored frames to the destination
ports.
Source Port [ n] (Selectable)
Allows a selected port [n] to be changed to a source port.
Firmware Revision: XX.XX.XX
Port Redirect Function
19602_22
BOOTPROM Revision: XX.XX.XX
Source Port:
1
1
1
2
2
3
3
3
Destination Port:
2
3
4
1
3
4
5
6
Device Type: 2E42-27
Remap Errors:
ON
ON
ON
OFF
OFF
ON
ON
ON
============ ============ ============
2E42-27 LOCAL MANAGEMENT
Event Message Line
SAVE PREVIOUS
RETURN
RETURN NEXT
Source Port [1] Destination Port [1] Status [ADD]
EXIT
Errors [ON]