TeeJet SENTRY 6510 - Manual (Page 8)

6
www.teejet.com
Sentry 6510 Capacity Monitor
Mounting the wheel sensor
Mount the wheel sensor to the frame on the inside one of the steering wheels.
Mount the magnet to the wheel hub or rim using the 20 mm support collar.
1. Screw or weld the sensor bracket.
2. Place the sensor in the bracket.
3. Turn the wheel and ensure that the distance between the sensor and the magnet is 5-8 mm.
Figure 4: Wheel sensor and magnet placement
4. Put the sensor cable to the junction box and connect to the circuit board as shown in Figure 2.
5. Use cable ties to fix the cable so it will not be pinched or worn during operation.
5-8 mm
Magnet can be painted
Washer
M4