TeeJet 834 Sprayer Control L2.12 - Manual (Page 3)

834 Sprayer Control TECHNOLOGIES
- 3 - 398-70019-R1
Programming Guidelines
Make sure that all hardware components are properly installed and tested. Before you start the
programming process you should first check if the console and all sensors are working properly.
Important Preliminary Information
Before you begin, we recommend that you review the following Programming Guidelines that
control the programming process:
☛
The key is used to power the console ON
☛
Auto & simultaneous key combination is used to power OFF (when not spraying)
☛
Holding key for 3 seconds is used to enter programming mode
☛
Depressing the key saves the current parameter and advances to the next
programming step during programming mode
☛
The value of a parameter is changed with the
+
and keys. Holding the
+
or key
changes the parameter rapidly.