TC-Helicon VoiceLive Rack Full User's Manual - Manual (Page 37)

36
Overview
The Wizard allows you to:
• Search for appropriate presets for your appli-
cation by criteria or “tags”.
• Sort presets by number or alphabetical listing.
• Pre-load a new preset while another is active
in order to execute the load on cue.
f The FIND tab
The FIND tab allows browsing of presets based
on their tags or how they are sorted.
To browse and load presets with the Wizard:
1. Tap the Wizard button and tab to the FIND
tab if it is not already loaded.
2. Turn the Data Wheel to browse forward and
back through the list of presets.
3. Press the Wizard button to load the highlight-
ed preset.
To filter the preset list via criteria:
1. In the FIND tab, turn the knob under SORT so
it shows ALPHABETIC. This will re-arrange the
displayed preset list starting with symbols, then
numbers 0-9, then A-Z. None of the Factory
preset names begin with a symbol, e.g. the “&”
symbol, so the first presets listed will start with
numbers.
2. Turn the knob under the first CHOOSE TAG
parameter to any value. You will see the list
update as this filter is applied.
3. You can then change the next two tags if you
want. Note that you will see progressively
fewer results as you use more tags. Also, you
may not see any results with certain tag com-
binations.
4. Highlight a preset name with the Data Wheel.
5. Press the Wizard button to load the preset.
6. Press Home to exit or remain in the Wizard
menu to load browse and load further presets.
The TAG list contains:
HARMONY ABOVE
HARMONY BELOW
HARMONY ABV+BEL
HARMONY NOTES
CHOIR
OCTAVES
DOUBLE
BIG VOCALS
AMBIENCE LONG
AMBIENCE SHORT
TAP DELAY
MODULATION
WET
DRY
HARDTUNE
MEGAPHONE
DISTORTION
EXTREME
CHARACTER
CORRECT
SIMPLE
COVERS
NO HARMONY
USER
The Wizard Button