TC-Helicon VoiceLive Rack Full User's Manual - Manual (Page 13)

12
f Changing the global mix
There are 4 global mix levels adjustable with the
front panel Mix knobs. When you adjust these
controls at the Home level, the mix screen will
show values for the controls as well as Mic/Line
input, Guitar input and main output levels.
• Voices - Combined level of the Harmony and
Doubling voices.
• Delay/Reverb - Combined level of the Delay
and Reverb effects.
• Guitar - If a guitar is connected to the Guitar
input and no Guitar Thru connection is made,
this control varies the level of the guitar in the
main output mix.
• Output - Adjusts the overall output level to
the main outputs and the Headphone output.
f Adjusting the Guitar features
The Guitar input has its own Reverb and µMod
processors, 3 band EQ and compressor. As long
as the Guitar Thru has no jack inserted, the guitar
will be routed to the main output mix with these
effects added.
To adjust the Guitar effects:
1. Touch the Setup button.
2. Use the Tab/Step arrow buttons to navigate to
the GUITAR tab.
3. Select and adjust parameters within the GUI-
TAR tab using the Navigate arrows and the
Mix knobs.
All changes are recalled automatically the next
time the unit is powered.
6. Sing while the accompaniment plays.
* There are 3 major scales and 3 minor scales;
generally Major 2 and Minor 2 will work for more
songs. See the Scales Diagram at the end of this
manual for details.
Touch Home to exit and try different presets, all
of which are set to the same key by the Setup
parameters changed in step 3.
f Modifying presets
The effect block buttons, the arrow buttons and
tabbed menus allow you to make changes to the
current preset quickly.
To modify a preset by enabling and disabling
effect blocks:
1. Touch any one or a group of effect blocks to
reverse their on or off state. The buttons’ LEDs
will show their status.
To edit effect block parameters including
preset mix:
1. There are two ways to enter the effects edit-
ing menu -
a. Hold any effect block button for 1 second. This
will present its editing menu. The on/off status
of the effect will not change however.
b. Touch the Edit button and use the Tab/Step
arrow buttons to locate the tab of effect you
want to edit.
2. Adjust parameter values on the highlighted
row with the Mix knobs.
3. Select another row with the wheel or the
Navigate up/down arrows.
4. To finish, either touch Store twice to save your
changes or touch the Home button to allow
further preset navigation without saving.
Basic Operation