TC-Helicon VoiceLive Touch 2 Reference Manual - Manual (Page 76)

The Setup menu
70
Switch-3 page
The optional three button footswitch, Switch-3, offers hands-
free control of VoiceLive Touch 2. You can assign individual
functions to any footswitch to control presets, looping, Hit etc.
Customizing Switch-3 footswitch
assignments
– Connect Switch-3 to the Footswitch jack.
– Set the Control parameter on the Switch-3 page to “Cus-
tom”.
– Adjust any of the Switch 1, 2, or 3 settings.
Control parameter
Allows quick switching between pre-set footswitch profiles and
your custom profile.
Default setting
Set the Control parameter to Default for the following settings:
– Switch 1 = Preset Down
– Switch 2 = Preset Up
– Switch 3 = Hit & Talk
Looping setting
Set the Control parameter to Looping for the following settings:
– Switch 1 = Loop Record / LoopPlay
– Switch 2 = Loop Stop/Clear
– Switch 3 = Loop Undo
Custom setting
Set the Control parameter to Custom to assign the three foot-
switches of the Switch-3 freely.
Switch 1, Switch 2 and Switch 3 parameters
These parameters can be used to assign the three footswitches
on a Switch-3 individually to the following features:
Preset Down setting
When a footswitch is assigned to Preset Down, tapping that
footswitch will switch to the previous preset.
Preset Down & Key setting
When a footswitch is assigned to Preset Down & Key, tapping
that footswitch will switch to the previous preset. Holding the
footswitch allows Harmony key input via a special menu.
Preset Up setting
When a footswitch is assigned to Preset Up, tapping that foot-
switch will switch to the next preset.