TC-Helicon VoiceLive Touch 2 Reference Manual - Manual (Page 53)

The Loop Menu
47
Muting loop layers
Loop layers can be muted (i.e., silenced temporarily) using
Mute mode.
– Record several loop layers to the loop slots as described in
the “Recording multitrack loops” section.
– Make sure the Loop Layers page is displayed.
– Tap the Mute mode button.
The Label “Mute” will be surrounded by brackets, indicating
that you are now in Mute mode.
– Tap the button of any loop layer you want to mute.
You can press multiple buttons simultaneously.
– Tap again to unmute.
Muted loops are shown with the Loop text reversed.
Mute mode with loop layers 2, 4 and 6 muted.
Muting vs . selecting loops
Muting loop layers does not affect selection. This means that
you could select, for example, Loop 1 in Select mode, then
switch to Mute mode, mute one or several loop slots and
continue overdubbing the still selected Loop 1.
Muting and recording
It is possible to record one or all layers while they are muted.
Muting loops in Select mode
You can mute loop layers while in Select mode, although the
mute action is not instantaneous. To mute in Select mode, hold
any single loop slot button to mute it. You cannot mute or un-
mute multiple loop layers simultaneously in Select mode.