TC-Helicon Voicesolo FX150 - Reference Manual - Manual (Page 22)

Show me how!
VoiceSolo FX150 Reference manual 20
Solo singer using a TC-Helicon vocal processor (alternate)
A. Plug your TC-Helicon unit’s headphone out
into the FX150’s AUX.
B. Connect the FX150’s OUT to your PA’s Mixer.
This setup leaves Inputs 1 and 2 free for other
mics or instruments. You will have to figure out
how to crowd all those people around the FX150
though.
If your TC-Helicon processor has an AUX input,
you can connect your media player there to add
backing tracks to the signal. Use the mixer in
your TC-Helicon processor to balance the vocals
and backing track.
FX150