TC-Helicon Voicesolo FX150 - Reference Manual - Manual (Page 14)

Connecting – aka “Exploring the ins and outs”
VoiceSolo FX150 Reference manual 12
Input 1: combo jack for
XLR or ¼” input
A. This is where you will plug in your microphone,
guitar or other instrument.
B. If you are using a guitar without a preamp,
plug it in here and press the “Hi Z” button next
to the input.
“How do I know if I have a preamp in my guitar?”
– Electric guitars: It’s uncommon to have a
preamp in any electric guitar. Use Input 1 with
the “Hi Z” button pressed.
– Acoustic guitars: Does your guitar need a
battery? That’s an easy way to tell if you have
an onboard preamp. If you are unsure, contact
your guitar manufacturer to find out what your
guitar is using.
Input 2: combo jack for
XLR or ¼” input
A. This input is great for a second mic, a pre-
amped guitar or another line level instrument.
B. Input 2 can also act as a monitor input if your
mixing board is capable of sending a monitor
mix.
We will explore monitor mixes and their use on
the upcoming pages.
Aux input
The 1/8” input is perfect for two different types
of connections.
– If you are playing to backing tracks, use the
Aux jack to connect your media player.
– If you use a TC-Helicon (or 3rd party) vocal/
guitar processor, connect the processor’s
headphone out to the FX150’s Aux jack.
This setup can also give you a second chan-
nel of “More ME!” which we will discuss in the
monitor mix sections.
FX150