TC-Helicon Voicesolo FX150 - Reference Manual - Manual (Page 18)

Monitoring explained
VoiceSolo FX150 Reference manual 16
Monitor THRU Connections
OR
If you have multiple VoiceSolo FX150 units on
stage, you can “daisy chain” them all together
using Input 2 and THRU, as shown above.
A. At the first FX150, plug the FOH monitor mix
into INPUT 2.
B. Press the FULL MIX/CH1 switch.
C. Connect an XLR cable between THRU on the
first FX150 and INPUT 2 on the next FX150.
D. Remember to press the FULL MIX/CH1 switch
on the second FX150 as well.
E. Repeat the process for each FX150 on stage.
! Remember that you will need to connect each
FX150’s OUT to the FOH mixer!
Depending on what’s plugged into Input 1 and
Aux on each FX150, each performer can have
their own “More ME!” mix.
Here are some examples of how “More ME!”
might look and sound for different musicians in
a band.
Drums Guitar Keyboard Vocals
Cue Mix More me
“More me!” vocals
Drums Guitar Keyboard Vocals
Cue Mix More me
“More me!” guitar
Drums Guitar Keyboard Vocals
Cue Mix More me
“More me!” keyboards
Drums Guitar Keyboard Vocals
Cue Mix More me
“More me!” guitar & vocals
The “More me! guitar & vocals” example is a
special case. Here, a multi effect unit’s head-
phone output is connected to the FX150 Aux
input, while the multi effect unit’s main outs are
connected to the FOH mixer.