Basic dive data – SUUNTO Vyper Air User Manual
Page 63
6.1.1. Basic dive data
During a No-decompression dive, the following information is displayed:
•
your present depth in meters/feet
•
the available no-decompression time in minutes as NO DEC TIME
•
the ascent rate presented as a bar graph on the right side
•
the Diver Attention Symbol if surface interval should be prolonged (see Table 7.1,
Alarms)
•
the Deep Stop depth, if activated
DIVE DISPLAY - PRESENT DEPTH IS 15 M,
NO-DECOMPRESSION STOP TIME LIMIT IS 38 MIN.
ELAPSED DIVE TIME IS 13 MIN.
Alternative displays, by pressing the UP/DOWN buttons, show:
•
the elapsed dive time in minutes, shown as DIVE TIME
•
the water temperature in °C/°F
•
the maximum depth during this dive in meters/feet, indicated as MAX
•
the current time, shown as TIME
63