SUUNTO Vyper Air - Manual (Page 53)

After activation, all graphical display elements are turned ON, and the backlight and
the beep are activated. After this, the selected altitude and personal settings are dis-
played, as well as the RGBM and Deep Stop status. A few seconds later the battery
power indicator is shown.
At this time, perform your pre-checks, and ensure that:
•
the instrument operates in the correct mode and provides a complete display
(AIR/NITROX/GAUGE mode)
• the battery level is ok.
• the altitude, personal adjustment, Deep stops, and RGBM settings are correct.
• the instrument displays correct units of measurement (Metric/Imperial).
• the instrument displays the correct temperature and depth (0.0 m/0 ft).
• the alarm beeps
If the optional wireless pressure transmitter is used ensure that:
•
the pressure transmitter has been properly attached and the cylinder valve is open
• the transmitter and the wrist unit have been properly paired on a suitable code
• the pressure transmitter is working (wireless transmitter indicator blinks, cylinder
pressure is displayed), and that there is no low battery warning displayed
53