SUUNTO t4d - Manual (Page 35)

TIP: If you have paired a Cadence POD, you can switch between speed and cadence as
the main view in SPEED AND DISTANCE mode by keeping [View Back]pressed.
6.2 Autolap and speed limits
With the autolap feature, you can define laps in distance instead of time (interval
training). When autolap is turned on (and your speed and distance POD is activated),
your Suunto heart rate monitor shows total distance, average lap speed, and lap time
for each lap.
NOTE: When using the autolap feature, it is very important to calibrate your speed and
distance POD accurately.
Description Value Setting
Autolap feature: on or off on / off autolap
Distance: lap distance according to
selected units in GENERAL settings 0000 dist.
To change autolap settings:
1. In SPEED AND DISTANCE mode, enter the menu ( SET ) and scroll with [Lap +] until
you reach AUTOLAP .
2. Enter the setting with [Mode] and set the value using [Lap +] and [Light -].
34