SUUNTO EON STEEL - Manual (Page 47)

3.22.1 Synchronizing logs and settings
To be able to synchronize logs and settings, you need to first install
Suunto DM5 (see
3.22 Suunto DM5 and Movescount ).
To download logs from your Suunto EON Steel and sync settings:
1. Start Suunto DM5.
If you are also using Suunto Moveslink, exit Moveslink before
proceeding.
2. Connect your Suunto EON Steel to your computer with the USB
cable.
3. Wait for the syncing to complete.
New dive logs appear in the DM5 Dives list on the left sorted by
date and time.
3.22.2 Updating firmware
Suunto DM5 is required to install new firmware for your Suunto
EON Steel . If a new firmware version is available, you are notified
when you plug in the USB cable.
Before updating the firmware, make sure the USB is securely
connected. The cable must not be unplugged until update process is
completed.
To update firmware:
1. Select Suunto EON Steel from the devices list in DM5
If you are also using Suunto Moveslink, exit Moveslink before
proceeding.
2. Synchronize if needed.
47