SUUNTO EON STEEL - Manual (Page 30)

local declination from a trusted source and set the value in Suunto
EON Steel .
To manually start calibration:
1. Keep the middle button pressed to enter the menu.
2. Browse to General / Compass.
3. Press the middle button to enter Compass.
4. Press the middle button again to enter Declination.
5. Scroll up/down to set the angle of declination: Starting from 0.0º
scroll up towards East or down towards West declination.
To turn declination off, set declination angle to 0.0º.
6. Press middle button to save changes and go back to the
Compass menu.
7. Keep the middle button pressed to exit.
3.9 Customization
You can customize Suunto EON Steel views and features with
Suunto DM5. Create up to 10 different dive modes with up to four
custom views each.
To customize Suunto EON Steel :
1. Download and install Suunto DM5 from http://www.suunto.com/
DM5.
2. Connect your Suunto EON Steel to the computer with the USB
cable.
3. In the devices window, select Suunto EON Steel .
4. Select the Customization tab. You can create new dive modes
and modify existing ones.
30