StarTech.com SATDUP11IMG Manual - Manual (Page 20)

Instruction Manual
17
6. Setup
From the Setup function you can access different advanced configurations. See the list
below outlining the details of each option. Refer to functions [6.1 – 6.5] for details.
6.1 Copy Area
The Copy Area function enables you to adjust the mode in which the hard drives are
copied. Refer to functions [6.1.1 / 6.1.2 / 6.1.3] for details.
1. Select “6.1 Copy Area” using the navigation buttons.
2. From the “Copy Area” menu you can select your desired method of hard drive
duplication. See the list below outlining the details of each option.
6.1.1 System and Files
It will copy source HDD’s System and Files instead of the whole HDD. The system will
analyze the source HDD and identify the data area to copy. The copy will be completed
as long as the source HDD data is within the size of the target HDD.
Note: System and Files only supports FAT, NTFS, and LINUX(ext2/ext3/ext4).