StarTech.com SATDUP11IMG Manual - Manual (Page 15)

Instruction Manual
12
4. Image Manager
The Image Manager enables you to create an Image Library Drive and review details,
delete, and rename drive images saved on your image drive. Refer to functions [4.1 /
4.2 / 4.3 / 4.4 / 4.5] for details.
Note: Ensure your Image drive is connected to the target port on the
SATDUP11IMG for the below operations.
4.1 Show HDD Info
Displays Disk information from the physical hard drive being used as your image drive.
4.2 Show Image Info
Displays each drive image file stored on your image drive.
4.3 Rename Image
Enables you to rename images on your image drive, follow the below steps to rename
a specific image on your drive.
1. From the function table, select 4.Image Manager >> 3.Rename Image.
2. Using the up and down arrow keys, select the file you wish to rename.
3. Using the up and down arrow keys, select words up to 8 characters, then press
the okay button to complete your update.
4.4 Delete Image
Enables you to delete drive images saved on your image drive. follow the below steps
to rename a specific image on your drive.
WARNING! All data stored in that specific drive image will be lost.
1. From the function table, select 4.Image Manager >> 3.Delete Image.
2. Using the up and down arrow keys, select the Image you wish to Delete.
3. Press the okay button to delete your specified Drive Image.