StarTech.com SATDUP11IMG Manual - Manual (Page 12)

Instruction Manual
9
1. The SATDUP11IMG will analyze the source Image Library Drive and ensure the
target drive is ready, by verifying size and format. Using the UP/DOWN Navigation
buttons and the Display Screen, select the drive image you would like to copy over
to the target drive and press the OK button.
2. Once the drives have been analyzed (and if necessary, formatted), you will receive
an indicator stating the SATDUP11IMG is ready and begin the duplication process.
3. The drive image duplication will be complete when the % indicator on the Display
Screen reaches 100%. The image drive now contains the drive image (and if
working with a non-formatted drive, an image drive has also been created.)
4. 1.3 HDD -> HDD
The HDD to HDD enables you to copy one hard drive exactly to another.
WARNING! The drive attached to the Target port will be overwritten, deleting all
data currently stored on the drive.
Note: The target drive must be equal to or larger than the source drive. If the
target drive is larger than the source drive, any additional space will remain
unformatted.