StarTech.com SATDUP11IMG Manual - Manual (Page 16)

Instruction Manual
13
4.4 Format HDD #2
Enables you to delete the data on the target drive and prepare it to be a new Image
Library Drive. Follow the below steps to format and create your Image Library Drive.
WARNING! All data stored on the drive connected to the target port will be
deleted.
1. From the function table, select 4.Image Manager >> 4.Format HDD #2.
2. Press the okay button to confirm your format.
5. Utility
From the Utility options you can access different administrative configurations and
information. See the list below outlining the details of each option. Refer to functions
[5.1 / 5.2 / 5.3 / 5.4 / 5.5] for details.
5.1 Show Disc Info.
The Show Disc Info. function displays information about the HDD attached to the
source port (Device 1) or the target port (Device 2) select your desired disc then refer
to functions [5.1.1 - 5.1.9] for details.
5.1.1 Model Number
The Model Number function shows basic information about the connected HDD.
[Disc Info.]
1. Model Number
Model: WDC WD
5000BPVT-00HXZT3
5.1.2 Version of Firmware
The Version of Firmware function displays the HDD firmware version of the connected
HDD.
[Disc Info.]
1. Version of Firmware
Version
01.01A01