Installation, Operation, Device connection – StarTech.com SV841DUSBI User Manual
Page 9: Initial power-up, Initial ip-osd setting
Instruction Manual
4
Installation
Device Connection
1. Connect the USB keyboard, mouse, and VGA monitor to the console connectors on
the IP KVM Switch.
2. Connect a Cat5 Ethernet cable to the LAN port.
3. Power up the monitor followed by the IP KVM Switch. The IP-OSD menu should
come up automatically. Follow the on-screen instructions to finish the initial setup.
Initial Power-Up
You must power up the IP KVM Switch with a keyboard, mouse, and monitor
connected before turning on any other devices (i.e. Slave KVMs, computers).
Ensure that the devices you are connecting are powered off before connecting them
to the unit.
Operation
Initial IP-OSD Setting
Power on the monitor and the IP KVM Switch. The IP-OSD menu will automatically
appear. Follow the on-screen instructions to complete the initial setup.
Press the
Settings Menu. Once the desired settings have
been achieved, press
It is recommended that you change the
password immediately and make a note of it.
*screenshots are for reference only