StarTech.com SV841DUSBI - Manual (Page 35)

Instruction Manual
30
then enter the password. If you want to access the locked device temporarily,
simply highlight it and press . Enter the password and you can access the
device. The device is automatically re-locked once you switch to another device.
During Scan mode, OSD skips the security-enabled device.
Function key
More functions are available by hitting . A new screen pops up displaying the
functions described below. Most of them are marked with a triangle ( ►) indicating
there are options to choose from. Using the and arrow keys, select
the function and press .
Available options will be shown in the middle of the screen. To select an option, use
the and arrow keys then press to select the options. You
can press to exit at any time.
Auto Scan
In this mode, the KVM automatically switches from one powered computer to the
next sequentially in a fixed interval. During Auto Scan mode, the OSD displays
the name of the selected computer. When Auto Scan detects any keyboard or
mouse activity, it suspends the scanning until activity stops; it then resumes with
the next computer in sequence. To abort Auto Scan mode, press the left
twice. Scan Type and Scan Rate set the scan pattern. Scan Type (: More\Scan
Type) determines if scanned computers must also be eye mark selected. Scan Rate
(: More\Scan Rate) sets the display interval when a computer is selected before
selecting the next one.
Manual Scan
Scans through powered computers using keyboard control. Scan Type (: More\
Scan Type) determines if scanned computers must also be eye mark selected. Press
the up arrow key to select the previous computer and the down arrow key to select
the next computer. Press any other key to abort the Manual Scan mode.
Scan Type
• Ready PC + Eye (N ): In Scan mode, scans through only powered computers that
are eye-marked selected.
• Ready PC: In Scan mode, scans through all powered computers. The non-volatile
memory stores the Scan Type setting.
• Eye (N ) Only: In Scan mode, scans only computers that have been eye-marked.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The options are 3
seconds, 8 seconds, 15 seconds and 30 seconds. The Scan Rate setting is stored in
non-volatile memory.