StarTech.com NOTECONS01 - Manual (Page 6)

Instruction Manual 3
LED Indicators
Server KB/Mouse: This lights up when the emulated USB keyboard/mouse is working. It will
blink briefly whenever the emulated mouse moves, or emulated key is pressed. Constant flashing
indicates some problem with the USB connection to the server. This can happen if disconnected,
or if the host’s operating system is not enumerating the USB device.
Server VGA: This indicates a valid VGA video signal is being received. It will be off if nothing is
connected (and in some power saving modes) and may flash if an unsupported video mode or
other trouble is seen with the video signal. This light will not turn on, regardless of the video
input status, until the adapter is connected to the application software at least once.
User Console Link/Activity: This lights up when a good connection to the laptop is established.
If flashing, it indicates the USB to the laptop is not connected or being ignored. Blinks briefly
when video data is sent to the laptop.
If all the lights are off, then this means the USB Crash Cart Adapter has no power from either
USB connection. Under normal operation, either USB port can provide enough power to
operate the unit. The USB keyboard/mouse emulation is always active, even if the laptop USB is
disconnected.
When used in PS/2 mode, the topmost light indicates correct PS/2 keyboard operation. Power is
received from the PS/2 port as it would be from USB port.