Canon ImageCLASS 2300 - Manual (Page 83)

Changing the Current Standard Settings 4-6
Customizing Settings
4
3
Press [F2] (-) or [F3] (+) to set the desired standard zoom ratio
(50% to 200%)
➞ press [OK].
You can also use the numeric keys to enter the standard zoom ratio, and
(Clear) to clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the COPY SETTINGS menu returns.
4
Press [Reset] to return to the Basic Features screen.
Copy Quantity
This setting enables you to set the standard copy quantity.
NOTE
The default setting is '01'.
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight <02 COPY SETTINGS>
➞ press [OK].
The COPY SETTINGS menu appears.
C
F2
F3
OK
Reset
Additional Functions
F3
F4
OK