Canon ImageCLASS 2300 - Manual (Page 16)

Flow of Copy Operations 1-7
Introduction to Cop
ying
1
6
Press [Start].
If the following screen is displayed, follow the instructions that appear on the
LCD display
➞ press
(Start) once for each original. When scanning is
complete, press (OK).
Copying starts.
IMPORTANT
While copying, you cannot change copy mode settings, such as the copy quantity,
paper size, and copy ratio.
NOTE
If there is a current job, the machine scans the original, and waits to print it. Printing
starts when the current job is complete.
7
If you want to stop, interrupt, or copy another original during
a copy job, follow the instruction below.
● If you want to stop a copy job while scanning:
❑
Press [Stop].
The display for selecting whether to cancel copying or not appears.
❑
Press [F3] (YES).
Scanning is canceled.
Start
Stop
F3