Canon ImageCLASS 2300 - Manual (Page 70)

Image Combination 3-17
Special Cop
ying F
eatures
3
Image Combination
This mode enables you to automatically reduce two or four originals to fit onto one
side of a selected paper size.
IMPORTANT
If the machine is operating in the Image Combination mode, you cannot use the
Two-Page Separation, Original Frame Erase, Book Frame Erase, or Different Size
Originals modes.
You can set the Image Combination mode only for the original sizes shown on the LCD
display.
Originals copied in the Image Combination mode must all be the same size.
The Image Combination mode cannot be used with free size paper.
You must have enough memory available in order to use the Image Combination mode
with paper larger than LTR.
NOTE
The reduction ratio is automatically set so that the originals fit onto the selected paper
size.
If the reduction ratio is set to less than 50% in the Image Combination mode, part of the
copied image may be trimmed slightly.
If you set the Image Combination mode, the machine is automatically set to the Auto
Zoom mode. However, you can also use the Preset Zoom or Zoom by Percentage mode.
■ 2 on 1
This setting reduces two originals to fit onto one copy sheet, and allows you to select the
layout order of each original. The following two layout types are available:
IMPORTANT
The layout order cannot be specified when you place an original horizontally.
2
1
1 2 1 2
Original (Vertical Placement)
The originals are printed in
the following order: right
half (1)
→ left half (2)
The originals are printed
in the following order: left
half (1)
→ right half (2)
No. 1 No. 2
Copy