Sportline Hydracoach - Manual (Page 19)

HydraCoach
Operation
Starting and Stopping the Hydration Program
All Hydration Program operations are executed by means of
the Start/Stop/Reset button and may only be performed from
within either of the two Hydration Program screens (TAC/TET/
AVG or PHG/%DG/AVG). Note: The Hydration Program may
never be started or stopped, or a NOM reset performed, from
the Clock and Date screen (CLK/DAY).
To start the HydraCoach, make sure that you are in either
the TAC/TET/AVG or PHG/%DG/AVG screen, and press
the Start/Stop/Reset button. A Stopwatch icon will begin
running in the lower right hand corner of the display. This
indicates that the Hydration Program is active, and that you
may begin drinking at any time.
To stop the HydraCoach, make sure that you are in either the
TAC/TET/AVG or PHG/%DG/AVG screen, and press the
Start/Stop/Reset button. The Stopwatch icon will pause,
and all Hydration Program functions will cease updating. The
HydraCoach will display the information that was last recorded
before the computer was stopped. To resume the Hydration
Program, press the Start/Stop/Reset button again in either the
TAC/TET/AVG or PHG/%DG/AVG screen, and all functions
will pick up where they last left off.
19
START STOP
SP3906IS0ISPORE.indd 19 3906IS0ISPORE.indd 19 10/20/08 4:38:05 PM 10/20/08 4:38:05 P