Sportline 480 Tough Timer User Manual

480 tough timer stopwatch

480

Tough Timer

Stopwatch

#4413

GUARANTEE CERTIFICATE
For purchases made in the U.S.
If at any time within one (1) year from the purchase date of this
product, it fails to perform properly because of defects in material
or manufacturing, return it prepaid to:
EB SPORT GROUP, 585 Oak Ridge Road, Hazleton, PA 18202

Complete this Guarantee Certificate and enclose it
(or a copy of it) with the product.
( P L E A S E P R I N T C L E A R LY )

NAME TEL

ADDRESS

CITY

STATE ZIP

STORE PURCHASED FROM

DATE OF PURCHASE PURCHASE PRICE

PROBLEM WITH PRODUCT

REPLACEMENT
This product has been carefully designed, manufactured and
packaged. If any parts are missing or damaged, please contact
us at the address above and we will replace the unit at no
charge. (Guarantee does not cover crystal or battery.)

For purchases made in the UK:
Should you experience problems with this item, please return
it to the point of purchase. This will not affect your statutory
rights. Alternatively return it to the address shown below for a
repair/replacement: StarCase (UK) Ltd, Berkeley Business Park,
Wainwright Road, Worcester WR4 9FA

www.sportline.com

Sportline® is a trademark of SPORTLINE, a division

of E & B Exercise, LLC, Yonkers, NY 10701

Distributed in the UK by

StarCase (UK) Ltd., Worcester, WR4 9FA

WV4413IS01SPT

OPERATING INSTRUCTIONS
1. Remove the plastic film from the LCD display on the front of the

stopwatch.

2. Slowly pull the battery protector tab out from the battery door

located on the back to activate.

IMPORTANT: READ THROUGH ALL INSTRUCTIONS BEFORE
BEGINNING TO USE YOUR STOPWATCH

FEATURES
• Time/Calendar Display
• Hour (12-24 Hour format), minute,
second, year, month, date and day
• Stopwatch: Times to 1/100 second
for 40 minutes, 1 second to
40 hours after the first 40 minutes
• Tally Counter: Counts up to 3999
• Electroluminescent Backlight

MAIN FUNCTION BUTTONS
A— Mode Button
Switch between normal time mode, stopwatch mode and tally
counter mode and time setting mode.

B— Start/Stop Button
Used to start and stop the stopwatch function
Also for value setting when in time setting mode
Used to display the calendar screen.
Used in combination with the Split/Reset Button to clear the tally
counter

C— Split/Reset Button
Used to split times in stopwatch mode
Clear timing records in stopwatch mode
Select time/calendar segment to be set in time setting mode
Used to advance 1 count in tally counting mode.
Used in combination with the Start/Stop Button to clear the tally
counter

D—Light
Used to turn on the electroluminescent backlight

DISPLAY SYMBOLS
NORMAL TIME MODE
1. Day of the Week
2. Hour
3. Minute
4. Second

CALENDAR DISPLAY
1. Day of the Week
2. Month
3. Date
4. Year

TALLY COUNTER MODE
1. Press A two times (from normal time mode) to get to tally

counting mode.

2. The tally counter symbol will appear on the display in the

upper right hand side of the display with a ‘0”.

3. Press either B or C to count. Each press will advance the

counter in values of 1.

4. To clear the count, press B and C simultaneously.

EL BACKLIGHT
To turn on the backlight simply press the light button (D)

Note: The light will remain on for about 5 seconds each time it is
pressed. Please note that the more the light is used, the more
drain it will put on the battery shortening the lifetime of the
battery.

CALENDAR
To see the calendar display (month/date/year), press B and hold
while in normal time mode.

STOPWATCH MODE BASIC FUNCTION
Press A to until you reach Stopwatch Mode.
Press B to activate the Stopwatch to count
Press C to reset the stopwatch to "0:00:00" before using the
stopwatch.

1. Accumulate elapsed time measurement: B-B-B-B-C

2. Split time measurement: B-C-C-B-C

3. Measurement between two competitors: B-C-B-C-C

Press A to return to the normal time mode.

TIME/CALENDAR SETTING
1. Press A three times (from normal time mode) to reach time

setting mode. The seconds and day of the week bar will flash to
let you know you are time setting mode.

2. Press C to select the time/calendar segment to be set. The

sequence will be: minute > hour > year > month > date >
seconds. (Seconds will reset to 00). The day of the week will
automatically be set when the year, month and date are set.

3. Press B to increase the setting value and change 12/24-hour

format when setting the hour.

4. Press A to return to the normal mode.

BATTERY REPLACEMENT
When the LCD becomes dim, replace with a new type CR2032, 3
Volt battery.

To replace battery, open battery compartment door with a coin
and remove the door. Replace with a fresh CR2032 battery
making sure to observe the correct +/- polarity. Replace the
battery compartment door and close securely by twisting into
place with a coin. The triangle on the battery door should align
with the triangle on the red rim at the top to ensure the battery
door is properly closed.

CAUTION – Battery Safety Information
• Non-rechargeable batteries are not to be recharged
• Rechargeable batteries must be removed before recharging
• Rechargeable batteries only to be recharged under adult

supervision

• Do not mix alkaline, standard (carbon-zinc), or rechargeable

(nickel-cadmium) batteries

• Do not mix old and new batteries
• Exhausted batteries to be removed
• Do not dispose of battery in fire; battery may explode or leak
• Do not dispose of product in fire; battery may explode or leak

0:00

- - - - - - -

0:00

- - - - - - -

20:00

- - - - - - -

0:10

0:18

- - - - - - -

Start

Stop

Restart

Reset

Stop

0:00

- - - - - - -

0:00

- - - - - - -

2:10

- - - - - - -

26:13

29:21

- - - - - - -

Start

Split

Split/release

Reset

Stop

TOUGH TIMER

WATER RESISTANT

SU MO TU WE TH FR SA