Sonics H540 E - Manual (Page 35)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
34
I N S T R U C T I O N M A N U A L • H A N D H E L D W E L D E R S
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
M A I N T E N A N C E
CLEANING INSTRUCTIONS
The power supply and converter may be cleaned using a solvent-free
cleaning solution (i.e., glass cleaner). Horns and probes should be cleaned
using isopropyl alcohol. Titanium horns can be autoclaved.
REPAIRS / SERVICE
If problems are encountered, contact our Service Department as follows:
Phone: 1-800-745-1105 • 1-203-270-4600
Fax: 1-203-270-4610
E-Mail: [email protected]
It is suggested that a system in need of repair be sent back to the factory,
with a written description pertaining to the nature of the problem.
Always contact the factory for return authorization before shipping any
instrument. Include date of purchase, model number, and serial number. For
units not covered by the warranty, a purchase order should be forwarded to
avoid unnecessary delay. Care should be exercised to provide adequate
packing to insure against possible damage in shipment. The system should
be sent with all transportation charges prepaid and return method of
shipment indicated.
NOTE: If packing unit
for return shipment, DO
NOT use styrofoam
“peanuts.”
Go To Top Of Document