SilentKnight VisorAlarm Plus 2U Operating Instructions - Manual (Page 4)

VisorALARM PLUS 2U System Overview
1 - 2
Doc.DM375-I
Ver. 1.0
1. The VisorALARM PLUS 2U receiver
The IP VisorALARM PLUS 2U receiver (Model VisorALARM PLUS 2U) is a communications
device developed by Teldat for security environments. The IP VisorALARM PLUS 2U receiver’s
principal task is to receive alarms over an IP network and to subsequently send them to an automation
software (SwAut). The functionality of the Teldat VisorALARM PLUS 2U is similar to any other
alarm receiver which receives alarms over the telephone line. If the automation software fails or isn’t
present, VisorALARM PLUS 2U is able to acoustically signal the reception of new signals. It also
provides specific function keys to manually acknowledge every received signal.
The IP VisorALARM PLUS 2U receiver operates together with the IP Module (mIP/IPDACT), which
receives the alarms from the alarm control panels and sends them to the Teldat VisorALARM PLUS
2U over an IP network. Additionally, the Teldat VisorALARM PLUS 2U monitors connectivity with
all the registered mIP/IPDACTs. Should connection fail, then the VisorALARM PLUS 2U generates
alarms for the SwAut.
The VisorALARM PLUS 2U IP receiver has the network backup feature added, which permits a
mIP/IPDACT the possibility of IP backup towards another IP receiver. The main receiver and the
backup receiver are always synchronized at the configuration level.
Figure 1. IP VisorALARM PLUS 2U Receiver