Shellab SMO5HP-2 - Manual (Page 6)

6 | P a g e
RECEIVING YOUR OVEN
Before leaving our factory, all High Performance Ovens are packaged in high-quality shipping
materials to provide protection from transportation-related damage. When an oven leaves our
factory, safe delivery becomes the responsibility of the carrier. Damage sustained during transit is
not covered by the
oven’s warranty. When you receive your High Performance Oven, inspect it for
concealed loss or damage to its interior and exterior. If you find any damage to the oven follow the
carrier’s procedure for claiming damage or loss.
I NSPECTING THE S HIPMENT
Carefully inspect the shipping carton for damage. Report any damage to the carrier service that
delivered the oven. If the carton is not damaged, open the carton and remove the contents. The
unit should come with an Installation and Operation Manual, warranty card, a Certificate of
Compliance, and the Programming Guide
– Watlow EZ-Zone Heating Profiles.
Verify that the correct number of shelves, shelf slides, and leveling feet have been included (see
the following table for quantities).
Included accessories
Shelves (2) Shelf Slides (4) Leveling Feet (4)
Carefully check all packaging before discarding. Save the shipping carton until you are certain that
the unit and its accessories function properly.
R
ETURNING THE
S
HIPMENT
If you must return the oven for any reason, first contact your service representative for a return of
material authorization (RMA). You must provide th
e unit’s data plate information. See Recording
Data Plate Information below.
R ECORDING D ATA P LATE I NFORMATION
Locate the data plate on the back of the oven next to the power inlet. The data plate contains the
oven model number and serial number. Enter this information below for future reference.
Date Plate Information
Model Number
Serial Number