Shellab SMO5HP-2 - Manual (Page 11)

11 | P a g e
INSTALLATION (CONTINUED)
S HELVING I NSTALLATION
The horizontal airflow within the chamber moves from the right-wall chamber duct to the large holes
on the left side. Place the shelves so they do not obstruct the duct holes on the left in order to
maximize airflow across the shelf space.
1. Install shelf slide hangers on opposites of the oven by inserting the slider’s tabs into the
chamber’s mounting slots, then pushing down gently to secure the slider.
2. Hang the shelf from the two installed sliders.
Figure 2: Installed Sliding Shelf, SMO5HP-2
C LEANING
The oven interior was cleaned at the factory but not sterilized. See the Cleaning and Disinfection
topics in the User Maintenance section on page 22 for more information.
B URN I N
Run the oven through the Burn In process before using it for normal applications. This is done to
eliminate smoking from the protective coatings on the oven’s heating elements when running above
150
°C. Please see the
Burn-In procedure on page 17 of the Operation section.